While it may be easy to strip colors form ceramic, wood or metal, plastic requires more attention to keep it flawless. There are many cleaning chemicals that will melt or damage the plastic.
In this article, we will talk about how to strip paint off a firearm in the easiest possible ways.
If you want to know more about this topic, all you have to do is read on.
How to Strip Paint off a Gun
- Plastic putty knife
- Canvas drop cloth
- Rubber gloves
- Rags
- Lacquer thinner
- 80 grit sandpaper
- Plastic drop cloth
- Steel wool
1. Unload your Weapon
Every firearm needs to be respected. While it is inherently inert, it can do serious harm to any person within a few hundred feet to up to one mile away when discharged. So, it is essential to treat every weapon like it is loaded. And always keep the finger off the trigger.
Your gun should be pointed in the safe direction, away from people. When you have found an ideal place, it is time to unload your firearm. Make sure that the safety is on. We recommend doing that outside. Place the gun in a canvas drop cloth.
Use a flexible-plastic putting knife to scrape and remove as much of the color as possible. But, you need to know that the blade will probably damage the original paint of the weapon. That is why you need to be extra careful with this step. That has to be done easily, trying to avoid any unintentional damages to your pistol.
When you have finished this step, you might notice a few scratches that the tool left, but try not to worry much about it especially if you will repaint it. Bear in mind that the paint removal is difficult and that you probably can’t avoid some minor scratches.
2. Protection
When you are working with the cleaning chemicals, the most important thing you should do is to protect yourself. Rubber gloves are an ideal solution for this job. Just put them on before you start removing the paint. That will protect your hands from potential burns. Although these chemicals are excellent solution for the cleaning processes, they are very harmful for our skin. If you can’t handle their strong smell, we recommend you put a face mask. It will protect your from chemical evaporation.
3. Apply Lacquer
The next thing you need to do is to apply the lacquer thinned to the firearm barrel. To properly do this step, use a clean rug. Use a plastic drop cloth to cover the barrel immediately. Leave it for about five minutes, then remove the drop cloth. If the paint is loosened enough, scrap it from the barrel. If it is not, you might want to wait for another couple of minutes.
Use the coarse sandpaper and the flexible putty knife. Use the steel wool and lacquer thinner to clean the weapon barrel. When you have done that, wait for another ten to fifteen minutes for the thinner to evaporate.
After removing a large amount of color from the surface of the plastic parts, you can pour warm water and a little detergent to scrub them. That way you will remove cleaning chemicals, as well as any residue of the old paint.
NOTE: Before it will have an opportunity to loosen the paint, the lacquer thinner might dry.
Another Easy Way to Remove the Paint from Your Gun
- DOT 3 Brake Fluid
- Plastic container
- Toothbrush
- Hard brush
- Rubber Gloves
- Old Cloth
- G96 oil
Process:
In a container, place gun’s parts from which you want to remove paint off and pour over the Brake Fluid. Use your toothbrush to cover all the parts adequately. Leave to sit for about an hour or two. While it is soaking, turn the parts around a few times to get all the liquid on. Make sure you are using your gloves because this chemical is very toxic.
You can notice that the paint started to peel off. All you need to do now is to use a cloth or a toothbrush (or any other hard brush you have) and start wiping the gun parts. You need to be persistent because the color will try to hold down to the plastic. Just keep rubbing it for a few times until you remove the paint. You might need to use two to three applications, but don’t worry, repeating the process will only help you to peel it off.
We recommend using some hard brush to remove any leftover paint. After you have done this step correctly, use G96 oil on it. It is one of the best gun care maintenance products on the market that is made to solve a gun user’s corrosion protection problems, lubricating and cleaning.
And there you go! Your firearm will look as good as it just came out from the gun’s factory. And if you want to repaint your weapon and restore its previous glory, you can check our reviews and see which product will best suit your needs.
Conclusion
Removing the paint from your gun might sound like a difficult task, but with our help, you will do it easily and quickly. Follow our guide and learn how to get the best results in no time! We hope you found our article helpful!For extra tips in chooshing the right color for repainting your gun read our review of great spray colors for guns.
The post Striping Paint off a Firearm appeared first on Tool Nerds.
from Tool Nerds https://ift.tt/2HkkehN
via IFTTT
No comments:
Post a Comment